Product Features:
- Exterior LED surface mounted wall & bollard lights
- Input voltage range: 100-240V AC 50/60Hz
- Constant current driver included
- Material: double anti-corrosion powder coated high-pressure cast aluminium & anti aging UV protected PC diffuser
- Both front & back diffuser
- Comes with stainless steel screws
- LED chips: 2835 LED
- Power factor: >0.5
- Ambient temp: -20 to 50ºC
- Not suitable for dimming
- IP rating: IP54
- Suitable for 2-way switching
- Suitable for use with PIR or Microwave sensors
- NOTE: AMUN2-4 are not for use inground
- For bollard lights, to maintain the IP rating please use circular cable in junction
- For bollard lights, for parallel and single connection we recommend using an appropriate IP68 connector (CLA Connector: CONN001 & CONN002)
*These bollards are designed for mounting on a solid surface such as a concrete path or sturdy timber decking.
*Must be installed by a licenced electrician (Installation instructions sheet provided in each product box).
*Unless protected, not recommended for environments with harsh weather conditions or heavy rainfall. IP65 fittings recommended for such environments.
*To avoid disappointment and warranty problems, please ensure the IP rating of the chosen product is relevant for the intended use.
Warranty
3 year replacement warranty
Part No.
AMUN1, AMUN2, AMUN3, AMUN4
07.05.2021 Amendment to Catalogue 2021: on page 238, the application image shows wrong product.
Brochure SDoC
